Zingasolv is a C9-C10 aromatic hydrocarbon solvent. Zingasolv is manufactured to the highest standards. It does not contain detectable quantities of polycyclic aromatics, heavy metals or chlorinated compounds.

DINITROL AB 429 IQ is a quick drying waterbased stone chip protection product. DINITROL AB 429 IQ provides a black elastic film which efficiently protects the vehicle body from stone ships and road salt. DINITROL AB 429 IQ is environmental friendly.

DINITROL 442 is a synthetic resin-plastic-based product which offers long-term corrosion and stone chipping protection. After drying, the material is resistant to carbon hydride-based cold cleaning agents, surfactant-based acid and alkaline high pressure cleaners, salt water and road salt. It can be coated once dry, as well as in a wet-on-wet process.

The product is especially suitable for coating entry steps, door sills, spoilers, rear valances and wheel housing, and in light of its anti-drone effect, for interior spaces, boots, bonnets, etc. where bitumen-based products are not desired.

DINITROL 447 Protect Super is a fast-drying, rubber and resin based auto-body protection agent. Clearly higher rust protection is achieved through zinc additives. Zinc ions also prevent or delay rust formation in areas where the protective film is damaged. DINITROL 447 Protect Super contains no aggressive solvents such as chlorinated hydrocarbons
(CFC/CHC), esters and ketones.

DINITROL 447 Protect Super can be coated with all conventional paints.permanently elastic and resists stone impact and road salt. After thorough drying,DINITROL 447 Protect Super does not attack PVC coatings, is asbestos- and bitumen-free,The product is particularly well-suited for after-treatment of auto-bodies.

Pyrmohyd is a water-soluble stone chipping and underbody protection product with a Dispersion base and corrosion protection pigments. This stone chipping protection is highly elastic, adheres well and is extremely effective against stone chippings. It is easy to coat with synthetic resin lacquers and 2-c acrylic lacquers, in addition to aqueous base lacquers. Pyrmohyd is not flammable. It contains no carcinogenic substances, does not require any special safety measures during application, and is exempt from labelling requirements in accordance with the regulation on dangerous substances at work.

As stone chipping protection on front and rear vehicle areas, door sills and entrances. As an anti-drone agent on flat vehicle parts and as repair material to re-touch original stone chipping protective films.

DINITROL 956 SD is a sound deadening coating based on waterborne dispersion. The product is free of VOC’s. It has an excellent adhesion on E-coat and primers, and good damping properties as well as corrosion resistance. DINITROL 956 SD is designed for sound damping applications on Buses, Trains, Comercial vehicles and Cars. It is used for underbody coating and stone chip protection. Specific use is the engine compartment and underbody of Buses as well as underbody and interior of trains. Other areas for use is sound deadening of aggregate buildings and metal constructions in vehicle-, railway- and shipbuilding, turbine housings, metal doors and air-condition plants.

DINITROL Drönex  is long-term protection products against corrosion and stone chipping with a synthetic resin/plastic basis. After drying, the materials are resistant to carbon
hydride-based cold cleaning agents, surfactant-based acid and alkaline high pressure cleaners, salt water and road salt.The products are especially suitable for coating entry steps, door sills, spoilers, rear valances and road salt.

The products are especially suitable for coating entry steps, door sills, spoilers, rear valances and wheel housing, and in light of its anti-drone effect, for interior spaces, boots, bonnets, etc. where bitumen-based products cannot be used. Other areas of application are the rear coating on cladding to reduce rattling noise caused by hail
or rain, or the machine cladding coating.

DINITROL RC 800 is a co-polymer latex combined with organic agents designed for application to corroded ferrous substrates.
DINITROL RC 800 actively converts the rust present on the substrate into a stable organic iron complex. As the polymer dries it forms an impermeable barrier to oxygen and moisture effectively sealing out any further corrosion. DINITROL RC 800 has an extremely low order of toxicity and does not contain phosphoric acid or lead.

DINITROL RC 800 has been successfully used on the following applications, automotive shellsoil rigs, railings, sewage treatment works, storage tanks, structural girders and railway vehicles.and chassis, ships ballast tanks, steel bridges, brine tanks, harbour installations, lamp posts,

RCX Rosumwandler is a water-based anti-corrosive paint which fights corrosion and creates an organic metal coat by reacting with the rusted substrate. The coat is overpaintable and avoids further corrosion. The product is designed for the direct application on rusted areas after loose rust parts removal. Combats even zinc-corrosion. An application on wet surfaces is possible, without damaging the paint coats. Easy applicable, odourless, waterbased and free of environmental damaging substances. Treatment by brushing,rolling, dipping and spraying. Consumption: approx. 15 m2 / l.

RCX rust converter is a water-based anti-corrosive paint which fights corrosion and creates an organic metal coat by reacting with the rusted substrate. The coat is overpaintable and avoids further corrosion. The product is designed for the direct application on rusted areas after loose rust parts removal. Combats even zinc-corrosion. An application on wet surfaces is possible, without damaging the paint coats. Easily applicable, odourless, water-based and free of environmental damaging substances. Treatment by brushing,rolling, dipping and spraying. Consumption: approx. 15 m2 / l.

DINITROL RC 900 is a Rust Converter with an organic chelat complex base and epoxy resin. DINITROL RC 900 actively converts rust on substrates into a stable organic iron complex. Once the product is dry, an impermeable barrier against further corrosion is formed. DINITROL RC 900 penetrates rust 7 − 10 times deeper than standard rust converters. DINITROL RC 900 forms a dry and strong adhesive film which is suitable as a base for paintwork and other corrosion protection products.

Characteristics:
• Transparent
• Low aromatic
• High flash point
• Self separating
• Bio- degradable
• Efficient

DINITROL AUTOCLEANER efficiently cleans and dissolves fats, waxes, engine and diesel oils. DINITROL AUTOCLEANER can be used on most metal parts. Before use, make sure parts and components are compatible with DINITROL AUTOCLEANER.

Wax Remover for the quick removal of preservation wax on paraffin base. Dries faster than traditional dewaxer.

Cover available with an integrated tape in various sizes . For covering cars and repainting .

Drain valve for corrosion protection of 60lt and 208lt drums.

Professional airless pump for the underbody and cavity protection . Consisting of 8 m high-pressure hose , Z - rotating part , gun , clutch and Trolley . Suitable for the processing of 20 l Containers.

Professional airless pump for the underbody and cavity protection . Consisting of pump , high-pressure hose , Z - rotation member , gun and clutch . Suitable for the processing of 60 l and 208 l drums . Optionally available with 10 or 15 m hose .

P2 masks offer protection up to 10 times the MAK value and protect against particles of hazardous , slightly toxic , solid and liquid substances . Suitable for processing Dinitrol cavity and underbody protection products.

By controlled amount of material different structures can be sprayed . By closing the needle valves at the nozzle exit , the cleaning after use is greatly facilitated . Pressure spray gun for processing 1 liter of underbody coating and stone chip protection incl . 1 pc . Hook probe and 1 pc . Flex probe 360 ° .

consisting of pressure regulator , pressure gauges and related connections

Thin sheet metal drill for drilling preserving .

Cleaning needles for cleaning the div . Nozzle .

Hooded coverall . Good for cavity and underbody spraying work.

Remove all probes in the field of corrosion protection.

Replaycing spraying set for  cavity pressure spray-guns . 1 pc . Hook probe and 2 pcs . Flex probe 360 ° .

For stirring the material of 60 l and 208 l drums .

For measuring the film thickness of underbody protection.

Surface  nozzle ( spraying angle 50 ° )

Surface nozzle for the underbody preservatives.

Surface tool with a reversible nozzle for cavity protection.