Filter

 
  • Tools and accessories
    Flexible nozzle for cavity protection

    Flexible nozzle for cavity protection

    Flexible nozzle , 2 m long and with a nozzle with a spray angle of 360 ° for cavity protection.

  • Tools and accessories
    Straight nozzle for cavity protection

    Straight nozzle for cavity protection

    Straight nozzle , 80 cm long and with a nozzle with a spray angle of 180 ° for cavity protection .

  • Tools and accessories
    Hook nozzle for cavity protection

    Hook nozzle for cavity protection

    Hook nozzle with a nozzle ( spray angle 15 ° ) for cavity protection .

  • Tools and accessories
    Hook nozzle for underbody protection

    Hook nozzle for underbody protection

    Hook nozzle for treating subfloors.

  • Tools and accessories
    Lever cylinder pump

    Lever cylinder pump

    Lever cylinder pump manually . Suitable for cavity protection products in order to pump it from a 60 l or 208 l drums .

  • Tools and accessories
    Hot wax application system

    Hot wax application system

    Professional hot wax application system without pump . Consisting of 8 m high-pressure hose , Z - rotation member , gun and clutch . Prevents an excessive spray . Suitable for the processing of 60 l and 208 l drums .

  • Tools and accessories
    High pressure hose

    High pressure hose

    For airless pump 1:26

  • Tools and accessories
    Cavity - pressure spray gun

    Cavity - pressure spray gun

    Professional cavity pressure spray gun with standard compressed air connection and check valve . Capacity 1 l . With a control valve , the amount of material can be accurately determined . By adding air to the spray a very fine atomization of the spray is performed ( seal kit Article Number 1700650 ) . For processing cavity protection products incl . 1 pc . Hook probe and 1 pc . Flex probe 360 ° .

  • Tools and accessories
    Hydraulic quick coupling for Airlesssystem

    Hydraulic quick coupling for Airlesssystem

    Plug-in coupling for gun airless pump

  • Tools and accessories
    Hydraulic connector

    Hydraulic connector

    Spare Airlesssystem

  • Tools and accessories
    Combihose for Airlesssystem

    Combihose for Airlesssystem

    1 m flexible hose between the gun and probe.

  • Tools and accessories
    Gun for Airlesspump 1:26

    Gun for Airlesspump 1:26

    Gun for Airlesspump 1:26

  • Tools and accessories
    hose recoiler

    hose recoiler

    The hose recoiler are extremely robust and are distinguished by their compact design . Both the material combination axis / bearing as well as the springs are maintenance-free . Suitable for ceiling mounting . Very easy to install , since the weight of the hose reel during assembly must not be kept . Used in corrosion protection stations where the barrel pump is not directly at the processing . 400 bar .

  • Tools and accessories
    Spray nozzle for aerosols

    Spray nozzle for aerosols

    Flexible nylon nozzle with 360 ° nozzle . For processing cavity preservation products in spray cans . Suitable for curved and narrow cavities ( 60 cm long ).

  • Tools and accessories
    structure gun

    structure gun

    Structure gun for processing 1 liter cans , the structure spraying of underbody and stone chip protection .

  • Tools and accessories
    sealing plug

    sealing plug

    Sealing plugs for sealing holes preservatives.

  • Tools and accessories
    Fitting for airless pump

    Fitting for airless pump

    drum insert

  • Tools and accessories
    Z - rotation member

    Z - rotation member

    Double flexible joint between the hose and gun . For airless pump.

  • Sealing compounds/Adhesives
    Dekaseal 8936 -Sealant

    Dekaseal 8936 -Sealant

    Dekaseal 8936 is a high performance polyisobutene (PIB) based sealant and is a permanent, slightly sticky, non-hardening synthetic sealant, which can be lightly dabbed away, but cannot be painted over.

  • Sealing compounds/Adhesives
    Dekaseal 8869 Butyl- sealant

    Dekaseal 8869 Butyl- sealant

    Dekaseal 8869 is a single component, plastic-elastic butyl based sealing compound which can be painted over.

  • Sealing compounds/Adhesives
    Dekasyl MS 5 MS-Polymer

    Dekasyl MS 5 MS-Polymer

    Dekasyl MS-5 is a MS Polymer based adhesive with a high green strength and is suitable for making elastic constructive joints. Due to its high green strength clamping times can often be reduced or clamps are not needed anymore. Dekasyl MS-5 can also be used as sealant, if similar material (similar stiffenesses) are joined together, or if mechanical fastening methods are used.

  • Sealing compounds/Adhesives
    Dekasyl MS 2  MS-Polymer

    Dekasyl MS 2 MS-Polymer

    Dekasyl MS-2 is a good compromise between an adhesive and a sealant. Dekasyl MS-2 is suitable for making elastic constructive joints, which also require a high strength. Dekasyl MS-2 is based on MS Polymer.

  • Sealing compounds/Adhesives
    401 spreadable sealant

    401 spreadable sealant

    DINITROL 401 is a solvent and rubber-based, air-drying and permanently elastic 1-c filler for brush and spatula application.
    For bodywork and lacquer work, DINITROL 401 can be used on untreated and primed bodywork, and on surfaces with paint primer and lacquers. After complete drying, the sealing compound can be coated using 1-c and 2-c repair lacquer. In order to ensure permanent sealing of horizontal and vertical welding seams on car bodywork,
    i.e. in the engine compartment, boot base and spoilers to create technically and optically similar sealing to the original. Also suitable for sealing large areas on trailers or large threaded joints.

  • Sealing compounds/Adhesives
    410 UV-Plus PUR sealant

    410 UV-Plus PUR sealant

    DINITROL 410 UV is a 1-component polyurethane sealing and bonding compound with good resistance and UV stability. The sealer is quick-drying and elastic, and can be coated with most lacquers. 2-C acrylic lacquers can be applied in a wet-on-wet process. Paints containing alcohol and alkyd resin impair hardening.

    We recommend carrying out an adhesion test before applying to complex substrates.commercial vehicle construction.It is suitable for sealing overlapping and expansion joints in visible interior and exterior areas inand lacquered metals, duroplastics (glass fibre reinforced plastics, hard PVC), wood and glass.trucks and caravan construction and shipbuilding. The material adheres well to primedDINITROL 410 UV is used for bonding and sealing in a range of industrial areas, such as bus,

  • Sealing compounds/Adhesives
    410 UV PUR sealant

    410 UV PUR sealant

    DINITROL 410 UV is a 1-component polyurethane sealing and bonding compound with good resistance and UV stability. The sealer is quick-drying and elastic, and can be coated with most lacquers. 2-C acrylic lacquers can be applied in a wet-on-wet process. Paints containing alcohol and alkyd resin impair hardening.

    DINITROL 410 UV is used for bonding and sealing in a range of industrial areas, such as bus, trucks and caravan construction and shipbuilding. The material adheres well to primed and lacquered metals, duroplastics (glass fibre reinforced plastics, hard PVC), wood and glass. It is suitable for sealing overlapping and expansion joints in visible interior and exterior areas incommercial vehicle construction.

    We recommend carrying out an adhesion test before applying to complex substrates

  • Sealing compounds/Adhesives
    460 sealant spotting

    460 sealant spotting

    DINITROL 460 is a permanently elastic, UV-resistant sealing compound with a high solid matter content and rubber parts.dry, the sealer is permanently elastic and does not become brittle. It is not harmful to chromium, paintsas a sealant between rubber profiles and bodywork joints, in addition to sealing glass sunroofs. Oncefor vehicle repair. Ideal for sealing non-bonded vehicle windows. DINITROL 460 can also be used.

  • Sealing compounds/Adhesives
    750 Polymer Sprayable Seam Sealer

    750 Polymer Sprayable Seam Sealer

    DINITROL 750 is a 1-component sprayable seam sealer which hardens upon contact with air humidity. With a special compressed air gun, the original surface structure can be reproduced.

  • Sealing compounds/Adhesives
    MS High Tech

    MS High Tech

    Product description High Teck is a high quality, strong one component adhesive with very high grip based on MS Polymer. That is why support of the adhesive assembly is not necessary in general. The product is odourless, neutral and free of silicone and isocyanides. After application the High Tech cures rubber seal.with atmospheric moisture to form a durable.

  • Sealing compounds/Adhesives
    MS Power Seal

    MS Power Seal

    is a high quality, strong one component adhesive/sealant base on MS polymer. The product is odourless, neutral and free of isocyanates.
    After application kLine MS Power Seal cures with atmospheric moisture to form a durable rubber seal.

  • Sealing compounds/Adhesives
    501 FC HM glass adhesive

    501 FC HM glass adhesive

    DINITROL 501 FC-HM is a humidity-curing and one component polyurethane for the direct-glazing of automotive glasses. The adhesive DINITROL 501 FC-HM includes the following properties:
    • good adhesion on paints
    • fast curing and high modulus
    • low odour
    • excellent working characteristics
    • very good standing properties
    • short cut-off string
    • high elasticity
    • solvent and PVC free
    • OEM approved
    • ageing and weather resistant
    • Crash test approved acc. FMVSS 212
    Together with the corresponding pre-treatments as for example primers and/or activators, DINITROL 501 FC-HM is designed for the use in replacing polyurethane direct-glazed automotive glass parts and other bondings in vehicle manufacturing. The adhesive’s high modulus property contributes remarkably to the stiffening increase of the car-body.

DINITROL Partner
DINITROL
DEKALIN
POLYTOP
Weiss
kLine
ZINGA
Ergo
Berger-Lacke
This website uses cookies. By using this site, you agree to our use of cookies. Privacy Info