Filter

 
  • Sealing compounds/Adhesives
    assembly line

    assembly line

    Double-sided mounting tape with very high initial force to assist assembly and as a spacer in bonding .

  • Sealing compounds/Adhesives
    Q Bond Repair Set

    Q Bond Repair Set

    Ultra strong adhesive with reinforcing and filling powders. Apply to practically all materials, for a fast and durable repair. Q-Bond consists of a two-component system – adhesive plus filling and reinforcing powders – that, when combined, have unique and insurmountable adhesive, filling and reinforcing capabilities, repairing broken parts, holes, fissures in a wide variety of substrates quickly and economically. The system is based in the combination of three different components:
    - cyanoacrylate based adhesive
    - black particles granulate
    - grey particles granulate

  • Sealing compounds/Adhesives
    Dekapren Contact adhesive

    Dekapren Contact adhesive

    Aromatic-free contact adhesive with short open time , high initial strength and good oxidation resistance. For bonding profiled rubber , leather, synthetic leather , metal, wood , plastics (e.g. : rigid PVC , ABS and PA ) etc.

  • Sealing compounds/Adhesives
    452 Spray adhesive

    452 Spray adhesive

    DINITROL 452 is a quick-drying glue with a rubber and solvent Basis.

  • Sealing compounds/Adhesives
    840 Skimfix 2K PUR-adhesive

    840 Skimfix 2K PUR-adhesive

    DINITROL 840 / 860 2K-PU are fast curing, easy to use, structural 2-component polyurethane adhesives, ideal
    for structural repairs and bonding of plastic parts. They cure by a chemical reaction of the two components
    (mixing ratio 1:1), forming a durable polymer, resistant to elevated temperatures, moisture, fuel, most common
    solvents and chemicals.
    DINITROL 840 / 860 2K-PU are specifically designed for small, quick and durable repair jobs, smart repair.

  • Sealing compounds/Adhesives
    870 MMA 2K Struktur-klebstoff

    870 MMA 2K Struktur-klebstoff

    DINITROL 870 MMA is a fast curing, easy to use structural 2-component methyl methacrylate adhesive, designed for structural bonding of thermoplastic, metal and composite assemblies. DINITROL 870 MMA cures by a chemical reaction of the two components (mixing ratio 1:1), forming a durable polymer resistant to elevated temperatures, moisture, fuel, many solvents and chemicals. DINITROL 870 MMA is not susceptible to off-ratio mixing, because it cures by free radical chainpolymerization at room temperature. It has a working time of 4 to 6 minutes and achieves 75% of ultimate strength in 20 minutes at room temperature (23°C). DINITROL 870 MMA offers a combination of high strength and stiffness as well as the ability to bond a wide range of substrates. DINITROL 870 MMA is supplied in ready to use double cartridges to be dispensed as a nonsagging gel.

  • Sealing compounds/Adhesives
    Power Metall

    Power Metall

    kLine Power Metall is an epoxy putty for quick repairs on two-component basis for aluminium, steel and other metals.
    Applicable like putty. Hardens like steel in 20 minutes. Fills holes, marks, scratches and cracks in tanks, barrels, pipes, etc. Can quickly be
    formed and moulded easily. Is suitable for drilling, threading, sandblasting, sawing and can bei over-painted. It adheres to most surfaces like, metal, wood, plastic, conrete and ceramics, also at moist ground. kLine Power Metall can also be used under water. Hand consistency is achieved within 20 min., final curing after 3 h, asbestos-free.

  • Sealing compounds/Adhesives
    Super glue

    Super glue

    EURO-LOCK E 610 is a middle viscosity cyanoacrylate adhesive for bonding a very wide range of materials. Formulated for bonding of rubbers, plastics and metal.
    E 610 is a one-component-adhesive, easy to handle and fast curing at roomtemperature. Resistant against humidity and high stability at low temperatures.
    Solvent-free without leaving any residues.

  • Tools and accessories
    PR static mixer

    PR static mixer

    Plastic mixer with 20 elements for optimal mixing of the two components without air pockets . For the processing of 840 Skimfix- Adhesive ( 50 ml) and Dinitrol 870.

  • Sealing compounds/Adhesives
    B Lock Bushings and bearings mounting - medium viscosity

    B Lock Bushings and bearings mounting - medium viscosity

    Medium viscosity , high strength, hard to disassemble . Gap assets 0.15 mm , by hand in 2 - 5 min. , Functional strength within 1 - 3 hours. Temperature resistant from -55 to + 175°C. Suitable for bearings and bushings with high strength and also as a joint connection .

  • Sealing compounds/Adhesives
    B Lock  Bushings and bearings mounting - viscous

    B Lock Bushings and bearings mounting - viscous

    Medium viscosity , high strength, hard to disassemble . Gap assets 0.15 mm , by hand in 2 - 5 min. , Functional strength within 1 - 3 hours. Temperature resistant from -55 to + 175 ° C. Suitable for bearings and bushings with high strength and also as a joint connection .

  • Sealing compounds/Adhesives
    Surface seal 2000

    Surface seal 2000

    Solvent-free design element , easy disassembly , splitting assets 0.3 mm , temperature resistant from -55 to + 150 ° C. For sealing dimensionally stable flanged to gearbox and motor casing , differential housings , bearing caps , etc.

  • Sealing compounds/Adhesives
    Surface seal 3000

    Surface seal 3000

    Solvent-free design element , easy disassembly , splitting assets 0.3 mm , temperature resistant from -55 to + 150 ° C. For sealing dimensionally stable flanged to gearbox and motor casing , differential housings , bearing caps , etc.

  • Sealing compounds/Adhesives
    Surface seal 4000

    Surface seal 4000

    Solvent-free design element , easy disassembly , splitting assets 0.3 mm , temperature resistant from -55 to + 150 ° C. For sealing dimensionally stable flanged to gearbox and motor casing , differential housings , bearing caps , etc.

  • Sealing compounds/Adhesives
    S Lock Screw fuse green

    S Lock Screw fuse green

    Medium viscosity , high strength, hard to disassemble , by hand in 10 - 20 min. , Functional strength within 1 - 3 hours. Temperature resistant from -55 to + 150 ° C. For all screws with coarse thread up to M20 .

  • Sealing compounds/Adhesives
    S-Lock Screw fuse red

    S-Lock Screw fuse red

    High viscosity, medium strength, removable , hand-tight in 10 - 20 min. , Functional strength within 1 - 3 hours. Temperature resistant from -55 to + 150 ° C. For all screws with coarse thread up to M36.

  • Sealing compounds/Adhesives
    R Lock Pipe and thread seal

    R Lock Pipe and thread seal

    High viscosity , high strength, no longer removable. Gap assets 0.25 mm , by hand in 20 - 40 min. , Functional strength in 6 - 12 hours . Temperature resistant from -55 to + 200 ° C. For threaded pipes and seals with high strength . Threaded up . max.56 .

  • Sealing compounds/Adhesives
    585 PU Remover

    585 PU Remover

    DINITROL 585 PUR Remover is a solvent based cleaning agent. The characteristics of the DINITROL 585 PUR Remover are:
    - good cleaning properties
    - no effect to the paint systems

  • Tools and accessories
    2K Pneumatic gun 400ml

    2K Pneumatic gun 400ml

    Pneumatic gun for 2-component adhesives . Suitable for both Dinitrol 512 and 517 Dinitrol

    > Item . Dinitrol 512 : Article 1207004

    > Item . Dinitrol 517 : Article 1228800

  • Tools and accessories
    2K Pneumatic gun-DKS 500 for Dinitrol 515

    2K Pneumatic gun-DKS 500 for Dinitrol 515

    From DKS developed professional pneumatic gun for the application of adhesives . The gun is made ​​entirely of anodized aluminum . Thus they should be handled extremely resistant and easy by the low weight in labor input . For processing Dinitrol 515 A / B adhesive set .

    > Item . Dinitrol 515 : Article 1231350

  • Tools and accessories
    2K Hand pressure gun 2:1

    2K Hand pressure gun 2:1

    Hand pressure gun for 2-component products . For the processing of 400 ml dual cartridges ( especially for Dinitrol 517 A / B )

  • Tools and accessories
    2K Hand pressure gun 400ml

    2K Hand pressure gun 400ml

    Hand pressure gun for 2-component products . For the processing of 400 ml dual cartridges ( especially for Dinitrol 512 A / B ) .

  • Tools and accessories
    Pullers

    Pullers

    2 - arm puller for the pole terminals and wiper arms .

  • Tools and accessories
    Caulking Gun C18PCG / 600A

    Caulking Gun C18PCG / 600A

    Powerful battery - bag press for foil bags . 4-pole motor for maximum performance with a compact design and excellent engine cooling . Digital Power Management ( DPM ) / RedLink ™ electronics - overload protection for long service life of the battery , motor and gearbox . Electronic regulation of Auspressgeschwindigkeitüber a 6 -step wheel. Automatic retraction of the plunger rod eliminates spills Technical specifications:

    Battery Voltage / Capacity : 18 V / 2.0 Ah

    Squeezing pressure 459 kg / 4500N

    Length: 470 mm

    Weight with battery : 2.3 kg

    Delivery : 1 x 18 V / 2.0 Ah Li-Ion

    battery

    Red charger

    pushrod

    Carrying case

  • Tools and accessories
    Caulking gun for cartridges C18 PCG / 310C

    Caulking gun for cartridges C18 PCG / 310C

    Powerful cordless caulking gun . 4-pole motor for maximum performance with a compact design and excellent engine cooling . Digital Power Management ( DPM ) / RedLink ™ electronics - overload protection for long service life of the battery , motor and gearbox . Electronic controls the discharge of a 6 -step wheel. Automatic retraction of the plunger rod eliminates spills Technical specifications: Battery Voltage / Capacity :

    18 V / 2.0 Ah Squeezing

    pressure 459 kg / 4500N

    Length: 470 mm

    Weight with battery : 2.3 kg

    Delivery : 1 x 18 V / 2.0 Ah Li-Ion

    battery

    Red charger pushrod

    Carrying case

  • Tools and accessories
    Basotec mat

    Basotec mat

    Specialty foam plates size 500 x 300 x 30 mm , easy to cut to the right size . suitable primer For applying Dinitrol .

  • Tools and accessories
    Clip Remover

    Clip Remover

    Clip-Remover with recording. To remove clips of all types .

  • Tools and accessories
    wire-inserting needle

    wire-inserting needle

    Flexible spring steel with handle for safe piercing the PU bead directly to the disk base to mount the cutting wire to remove glass .

  • Tools and accessories
    Wire handle- and backstop

    Wire handle- and backstop

    Flexible spring steel with handle . For secure piercing the PU bead directly to the disk base to mount the cutting wire to remove glass .

  • Tools and accessories
    selfstretching- wire handle

    selfstretching- wire handle

    For fastening of the wire at both ends in order to enable sawing movements during the cutting out . The brass self tensioner prevents wire breakage , recommended the use of a square wire . For secure Glass removal of bonded front, rear and side windows .

DINITROL Partner
DINITROL
DEKALIN
POLYTOP
Weiss
kLine
ZINGA
Ergo
Berger-Lacke
This website uses cookies. By using this site, you agree to our use of cookies. Privacy Info